The rule
ORO.GEN.200(a) says the operator shall establish, implement and maintain a management system that includes:
(1) clearly defined lines of responsibility and accountability throughout the operator, including a direct safety accountability of the accountable manager;
(2) a description of the overall philosophies and principles of the operator with regard to safety, referred to as the safety policy;
(3) the identification of aviation safety hazards entailed by the activities of the operator, their evaluation and the management of associated risks, including taking actions to mitigate the risk and verify their effectiveness;
(4) maintaining personnel trained and competent to perform their tasks;
(5) documentation of all management system key processes, including a process for making personnel aware of their responsibilities and the procedure for amending this documentation;
(6) a function to monitor compliance of the operator with the relevant requirements. Compliance monitoring shall include a feedback system of findings to the accountable manager to ensure effective implementation of corrective actions as necessary;
Item (7) adds anything the other Subparts or Annexes require. Then ORO.GEN.200(b):
The management system shall correspond to the size of the operator and the nature and complexity of its activities, taking into account the hazards and associated risks inherent in these activities.
A five-aircraft charter operator isn't expected to run the system of a national airline, but every item above still has to be there.
What auditors look for, item by item
- (a)(1): an organisation chart and written responsibilities that match what people actually do, with the accountable manager visibly owning safety.
- (a)(2): a safety policy signed at the top and known by staff.
- (a)(3): a hazard register and risk assessments kept current, including before changes, with evidence that mitigations were checked. This is where management of change sits.
- (a)(4): training records that match the roles.
- (a)(5): a manual that describes the real processes, and a way of amending it and telling people.
- (a)(6): an audit programme, findings reported to the accountable manager, and corrective actions closed.
EASA's acceptable means of compliance and guidance material under ORO.GEN.200 give the detail for each item, with separate material for complex and non-complex operators.
EASA and UK: the same rule, with one difference
The UK's ORO.GEN.200, in its assimilated Regulation 965/2012, reads word for word the same as EASA's. The difference sits next to it: EASA added ORO.GEN.200A, information security management, through Regulation (EU) 2023/203 (Part-IS). The UK's version of the regulation has no ORO.GEN.200A, so under this regulation EU operators have an information security requirement that UK operators don't. If you operate in both, your manuals need to reflect both.
Checking your own manual
Most operators find out how their manual measures up to ORO.GEN.200 at audit, or by paying someone to check it beforehand. You can do it in-house. Chuck reads your OM-A or SMS manual against ORO.GEN.200, EASA or UK, section by section, and sets out what your manual says against each item and where it may fall short, citing the rule on every line. Your own people check it and decide.
Sources
- EASA Easy Access Rules for Air Operations (Regulation (EU) No 965/2012)
- UK Regulation 965/2012, Annex III (Part-ORO), legislation.gov.uk
This briefing summarises ORO.GEN.200 of Regulation 965/2012 as published by EASA and on legislation.gov.uk. It isn't legal advice: check the rule text and your authority's AMC and GM.
